THEORYMERIDIAN

Quantum Spin Lab · Light

How can light
twist a plate?

Light carries angular momentum. In circularly polarized light, each photon carries +ħ or −ħ along its direction of travel. Change the light and the twist changes.Shape the polarization, detect photons, then twist a plate.

Ideal optical model
01 / Polarization and helicity
Electric fieldDirection of travelRotation of the field, facing the beam

Viewing conventionFacing the oncoming beam: x right, y up, light travelling toward you. For circular polarization, counter-clockwise rotation means every photon carries +ħ. Elliptical light is a mix: each photon is found with +ħ or −ħ. Field motion is slowed by about 10¹⁵ times. The bench is an illustration, and the blue pattern is a drawing of the wave's electric field: nothing like it is visible in a real beam.

Average spin per photon, along travel

+1.00ħ
Chance of +ħ for one photon
Chance of −ħ for one photon

Start here: choose the light

01Detect single photons0 photons

    An ideal helicity detector. Every photon is found with +ħ or −ħ; never 0. Linear light is not made of zero-spin photons: half are found with +ħ and half with −ħ. Counts clear when the light changes.

    No photons detected yet.

    More settings: shape the light yourself

    −45°: clockwise circular. 0: linear. +45°: counter-clockwise circular. In between: elliptical.

    Beth, 1936

    Flip the spin of the light
    and the plate takes the difference.

    A half-wave plate turns counter-clockwise circular light into clockwise circular light. Each photon goes from +ħ to −ħ, so the plate must take up 2ħ. Richard Beth hung a quartz half-wave plate on a fine fibre and measured that twist.

    Ideal single passMeasured by Beth
    02 / Torque on a plate
    Light beam, travelling upTwist of the plate

    Twist greatly exaggeratedThe real angles are tiny. Polarization symbols are seen from above, facing the oncoming beam. The hanging plate is an illustration of the idea, not a model of Beth's apparatus.

    Torque on the element, along the beam

    0N·m
    Photons per second
    Mean spin given to the element per photon
    Mean spin per photon, in → out
    01Light going in
    02What hangs in the beam
    More settings: plate angle, power, wavelength

    Matters for linear light. For circular light through a half-wave plate the torque is the same at every angle.

    At fixed power, a longer wavelength means more photons per second, each with less energy. Each still carries ħ, so the torque grows.

    What was measured, and what is not shown

    Real torque,
    no spinning photon.

    The rotating field belongs to the light wave as a whole. A photon is not a little spinning ball, and its spin is not explained by a magnetic moment.

    Real experiment

    Beth, 1936

    Beth sent circularly polarized light through a quartz half-wave plate hanging on a quartz fibre. The measured torque agreed with ħ of angular momentum per circularly polarized photon, in sign and size.

    His apparatus added a fixed quarter-wave plate and a mirror so the light passed twice, multiplying the torque. This page calculates a single pass. R. A. Beth, Phys. Rev. 50, 115 (1936); E. Brasselet, Advanced Photonics 5, 034003 (2023).

    Two helicities

    Spin 1, two outcomes

    A massive spin-one particle has three possible results along an axis. A free photon is massless: along its direction of travel it has only +ħ or −ħ. Compare with spin zero, one-half and one.

    Beyond this page

    Orbital angular momentum of light

    Beams with a twisted wavefront can also carry orbital angular momentum, separate from the spin tied to polarization. This page shows spin only.

    S. M. Barnett et al., J. Opt. 18, 064004 (2016).

    The reasoning, in the open

    Look under the model.

    The calculation

    The light travels along +z. Its field is E = Re[(Ex x̂ + Ey ŷ) e^{i(kz − ωt)}], with complex amplitudes Ex and Ey (the Jones vector). Ellipticity χ and orientation ψ give (Ex, Ey) = R(ψ)·(cos χ, i sin χ).

    s₃ = 2 Im(Ex* Ey) / (|Ex|² + |Ey|²)
    P(+ħ) = (1 + s₃)/2, P(−ħ) = (1 − s₃)/2, average = s₃ ħ

    (1, i)/√2 gives s₃ = +1: counter-clockwise facing the beam. (1, −i)/√2 gives −1. Linear light gives 0, an equal mix of +ħ and −ħ results.

    An element that changes s₃ takes the difference. With ω = 2πc/λ and photon flux P/(ħω):

    τ = P (s₃,in − s₃,out) / ω
    half-wave plate: τ = 2 s₃,in P / ω absorber: τ = s₃,in P / ω

    For 1 mW at 633 nm through a half-wave plate, ω = 2.976 × 10¹⁵ rad/s and τ = 6.72 × 10⁻¹⁹ N·m. Wave plates use the ideal lossless Jones matrix R(θ)·diag(1, e^{iΓ})·R(−θ), with Γ = π or π/2.

    Read the numerical model · Validation record

    Sources
    Limits of this model

    Plane waves, ideal lossless plates and a perfect absorber. Only spin angular momentum is counted. A single pure polarization state is shown; unpolarized light is a mixture and has no single field pattern. Field motion is slowed by about 10¹⁵ times and the plate twist is exaggerated.

    Keyboard, motion and privacy

    Use Tab to reach each control, arrow keys for sliders and choices, and Enter or Space for buttons. Pause freezes the illustration only. Motion starts paused when your system asks for reduced motion. Results are written as text. The page runs entirely in your browser with no accounts, trackers or external code. See the privacy notice.