Bound charge
Each molecule's charges shift a fraction of an atomic diameter. Inside the wall the shifts cancel; at the surface they leave a thin layer of charge. The wall as a whole is still neutral.
Charge, Fields & Light Lab · Electric polarization
A rubbed balloon sticks to a wall that has no net charge at all. The wall is an insulator: its charges cannot flow, but each molecule can stretch a little.Bring the charge closer, then flip its sign.
Computed from the modelThe wall is treated as a thick, uniform insulator. Bound charge is charge that has shifted within molecules; it cannot leave the wall or flow along it. Drag the charged object or use the slider.
Force on the charged object
Start here: note the direction of the force, then flip the sign of the charge
In nanocoulombs.
In millimetres, from the charge to the wall's surface.
The relative permittivity. Values for real materials vary with composition, humidity and how fast the field changes; these are typical figures.
In nanocoulombs, in a small patch straight ahead. This is net charge left on the surface, for example by contact. It is a different thing from bound charge.
In units of the charge of a proton.
In nanometres, from the ion to the molecule.
Its polarizability, as a volume in cubic ångströms. Water is about 1.5; benzene about 10.
Neutral, but not unresponsive. In a nonuniform field the two halves of a stretched molecule feel different pulls: the nearer, opposite charge is pulled harder than the farther, like charge is pushed. The net force is always toward the stronger field, so a neutral insulator is attracted by a charge of either sign.
Three different things
They are easy to confuse because all three can make a neutral-looking object stick.
Each molecule's charges shift a fraction of an atomic diameter. Inside the wall the shifts cancel; at the surface they leave a thin layer of charge. The wall as a whole is still neutral.
If the balloon touches the wall it may leave some of its own charge behind. That charge has the same sign as the balloon and repels it. On a good insulator it stays where it was put.
In a metal, charge is free to move across the whole body, and the surface charge is as large as it can be. An insulator with a very large permittivity behaves almost the same way in front of a charge; the difference shows when you ground it.
The reasoning, in the open
For a point charge q at distance d from a thick insulator with relative permittivity εr, the field in front of the wall is that of q plus an image charge −q(εr − 1)/(εr + 1) at the mirror position. The force is
F = −q² (εr − 1) / [4π ε₀ (εr + 1) (2d)²]
and the bound surface charge at distance s from the nearest point is σb = −(q/2π) (εr − 1)/(εr + 1) · d/(s² + d²)3/2. The page checks the force by adding up the pull of that surface charge directly. A patch of deposited charge qw on the surface acts, in front of the wall, like a charge 2qw/(εr + 1).
For one molecule with polarizability α in the field E of a point charge: induced dipole p = αE, energy −½αE², force −2α(kq)²/r⁵.
Read the numerical model (dielectric.js) · Validation record
The charged object is a point, the wall is perfectly flat, thick, uniform and responds in proportion to the field. Real walls are layered, rough and slightly conducting, and real materials leak charge at very different rates. A real balloon is not a point and carries its charge on its surface. The force that keeps a balloon from sliding down also needs friction, which is not modelled. The single-molecule view ignores permanent dipoles and thermal motion.
Use Tab to reach each control, arrow keys for sliders, and Enter or Space for buttons. Nothing on this page moves by itself. Results are written as text. The page runs entirely in your browser with no accounts, trackers or external code. See the privacy notice.