Weak spots. Real pasta has small flaws. Here the breaking limit varies along the strand by a few percent (5 % by default), drawn at random from the strand number shown in the controls. The pattern is fixed for each number, so every run can be repeated.
Shortest piece. In the ideal theory the ripple’s first crest appears right next to the new end, so a strand would shatter into dust. Real strands do not: a crack needs a little time and room to form, and measured pieces are rarely shorter than about 3 cm. The simulator represents this with a shortest allowed piece (40 mm by default, the value used for the film). This choice largely decides where the later cracks fall and how many pieces you get. Move the slider to see how much.
Left out. Twisting, air resistance, gravity during the first 20 ms, contact between pieces, and any motion out of the plane. A light internal damping is included (a relaxation time of half a millionth of a second, chosen as plausible, not measured). How fast you bend makes no difference here, because bending is treated as slow.
Twisting first. Heisser and co-authors showed that twisting a strand strongly before bending it makes a clean break in two far more likely. Twist is outside this planar model, so there is no twist control.
What the numbers say. Across 400 numbered strands at the default settings the model gave 3 pieces for <1 %, 4 pieces for 84 %, 5 pieces for 16 %, and never a clean break in two. This agrees with the common observation that two pieces are uncommon, but the exact shares depend on the shortest-piece assumption. Real strands vary more than this model does.