No field inside
If there were a field inside a conductor, its free charges would move. Equilibrium means they have stopped, so the field inside is zero. This is true only for charges at rest: a wire carrying a current has a field inside it.
Charge, Fields & Light Lab · Electrostatic equilibrium
Charge on a metal is free to move, and like charges push each other apart. They end up on the surface, arranged so that the field inside the metal is zero. On a pointed body, that arrangement is far from even.Change the shape, then bring a charge near it.
Solved numericallyThe body is a solid of revolution, seen from the side. Its surface is cut into 96 bands and the charge on each is found so that the whole surface is at one potential. Spikes show charge per area; the longest are cut short and capped with a dot. Inside the metal there are no lines: the potential is the same everywhere, to the tolerance shown.
Charge density at the right-hand end ÷ at the waist
Start here: go from a ball to a pointed body and watch the right-hand end
In nanocoulombs. A grounded body takes whatever charge the Earth supplies.
A nearby charge pulls opposite charge toward it and pushes like charge away.
Three results, one cause. Charge in a metal moves until nothing pushes it any more. So in equilibrium the field inside the metal is zero, all net charge sits on the surface, and the surface is at a single potential. Where the surface curves sharply, more charge is needed to keep it at that potential, and the field just outside is strongest.
What the solution shows
None of this is assumed by the page. It solves for the surface charge and then checks the field inside.
If there were a field inside a conductor, its free charges would move. Equilibrium means they have stopped, so the field inside is zero. This is true only for charges at rest: a wire carrying a current has a field inside it.
The field just outside the surface is the surface charge density divided by ε₀. Near a sharp end both are large. In air, a field above about 3 million volts per metre starts a spark, which is why lightning rods are pointed.
An isolated body keeps its total charge and rearranges it. A grounded body is free to draw charge from the Earth, so a nearby charge leaves it with a net charge of the opposite sign. An empty hollow inside a conductor is also field-free; a hollow with a charge in it is not.
The reasoning, in the open
The surface is divided into rings. A ring of radius ρ′ with charge q gives, at a point (ρ, z), the potential
φ = q K(m) / (2π² ε₀ D), D² = (ρ + ρ′)² + (z − z′)², m = 4ρρ′ / D²
where K is the complete elliptic integral of the first kind. The page requires the summed potential of all rings, plus that of any outside charge, to equal one value V at the middle of every band. For an isolated body the total charge is fixed and V is solved for; for a grounded body V = 0.
Checks: a charged sphere comes out uniform and at kQ/a; a grounded sphere reproduces the image-charge solution; a spheroid reproduces its exact capacitance and its exact charge distribution, with tip-to-waist ratio a/b.
One solid metal body in vacuum, with at most one point charge on its axis. Equilibrium only: no currents. The surface is represented by 96 flat bands, so values at a perfectly sharp tip are limited by that resolution: the true density there grows without limit, and a real tip is always slightly rounded. The inside field is zero only to numerical tolerance; the page reports the tolerance it achieved. Cavities are described in the text but not simulated.
Use Tab to reach each control, arrow keys for sliders, and Enter or Space for buttons. Nothing on this page moves by itself. Results are written as text. The page runs entirely in your browser with no accounts, trackers or external code. See the privacy notice.