Field
The electric field at a point is the force a small test charge would feel there, divided by its charge. It is measured in newtons per coulomb, which is the same as volts per metre.
Charge, Fields & Light Lab · Electric fields
Nothing touches the second charge, yet it is pushed. Carry a small test charge around and note the push at each point. That map is the electric field.Drag the probe, then add a second source.
Computed from the modelDrag the probe or any source. The sources are held in place: the probe feels their field and does not disturb them. Small arrows show the direction of the field; brighter means stronger, on a logarithmic scale.
Force on the probe
| Source | Distance | Its field here |
|---|
Start here: choose an arrangement, then carry the probe around
In centimetres from the centre. The probe stops 1.5 cm from any source: the point-charge formula has no value at zero distance.
In nanocoulombs. Changing the probe's charge changes the force on it, not the field it sits in.
The probe answers to the field where it is. The force on it is its own charge times the field at its own position: F = qE. It does not need to know where the sources are, how many there are, or how the field got there. Two different arrangements that make the same field at one point push a charge there in exactly the same way.
What the picture means
Arrows and lines are drawings of a prediction: what a test charge would feel if you put it there.
The electric field at a point is the force a small test charge would feel there, divided by its charge. It is measured in newtons per coulomb, which is the same as volts per metre.
With several sources, the field is the sum of the fields each would make alone, added as arrows. Between two equal charges the two pushes are equal and opposite, so a probe at the midpoint feels no force, although both sources are still acting.
For charges at rest you could describe everything with forces between pairs of charges. The field earns its place when something changes: it carries energy and momentum, and a change in it takes time to travel. That is the next experiment.
The reasoning, in the open
Each source of charge qᵢ at distance rᵢ contributes a field along the line from the source to the point:
Eᵢ = qᵢ / (4π ε₀ rᵢ²), E = E₁ + E₂ + … (added as vectors), F = qprobe E
The potential is V = Σ qᵢ / (4π ε₀ rᵢ), with zero far away. The field points from high potential to low and is perpendicular to the equal-potential lines. Field lines are followed with a fourth-order Runge-Kutta step of 2 mm. The charges lie in the plane of the screen, but the field is the ordinary three-dimensional one.
Everything is at rest, in vacuum. The sources are held in place by something outside the model, so they do not respond to the probe or to each other. The probe's own field is left out: in this model a point charge does not push itself. Field lines show direction only; in a flat slice through a three-dimensional field their spacing is not a faithful measure of strength, which is why the arrows carry strength by brightness and the readout gives the number. Close to a source the field grows without limit, so arrows and the probe stop 1.5 cm away.
Use Tab to reach each control, arrow keys for sliders, and Enter or Space for buttons. Choose what to move under "What to move", then use the two position sliders: everything that can be dragged can be placed that way. Nothing on this page moves by itself. Results are written as text. The page runs entirely in your browser with no accounts, trackers or external code. See the privacy notice.